SunBravo Mono-Crystalline Modules

SunBravo PM060MW6
60-Cell Mono-Crystalline Photovoltaic Modules




Made in Taiwan


AUO’s SunBravo PM060MW6 are mono-crystalline modules with the multi-busbar half-cut cell technology to reach a conversion efficiency rate of 20.4% and a maximum power output of 360 watts.


Product Features:
  • Multi-busbar half-cut cell technology:Enhanced module reliability due to shorter current paths and lower impact of micro-cracks
  • Certified high PID resistance passing 1000-hour tough environmental test
  • Humidity / salt mist / strong wind resistance
  • 12 times more salt-mist resistant, 40% more moisture exclusion, and dynamic mechanical loading 4 times higher than the IEC requirement. Suitable for rooftop, ground-mounted, and floating systems.
  • Extended product warranty of 15 years as well as 25 years of 85% or more performance guarantee
  • IP-68 potted junction box and MC4 connector
  • Passed test standards that are 3 times more stringent than the International Electrotechnical Commission(IEC) test requirements
  • VPC-certified by Bureau of Standard, Metrology and Inspection, Taiwan



Electrical Data (STC)
Nominal Power PN 340-360W
Max. System Voltage 1000V 
Typ. Temperature Coefficient of PN -0.37%/℃
Certifications & Tests IEC / EN 61215, IEC / EN 61730,
IEC 61701 (salt mist corrosion test) , 
Dimensions (L x W x H) 1728 x 1002 x 40 mm



 * For further information, please refer to the relevant documents in Download Center.