P-Mono Modules

SunBravo PM072MW2 / PM072MW3
72-Cell Mono-Crystalline Photovoltaic Modules

 

SunVivo_PM072MW2

 

Made in Taiwan

 

AUO’s SunBravo PM072MW2 / PM072MW3 mono-crystalline modules are widely used for commercial and industrial applications.

 

Product Features:
  • High power performance of 390 watts by strict standards of materials control, performance testing and cosmetic inspection.
  • Multi-busbar technology:Enhanced module reliability due to shorter current paths and lower impact of micro-cracks
  • Up to Diamond Level potential-induced degradation(PID) resistance
    Diamond Level:Humidity 85%, temperature 85°C, and 1,000-hour prolonged testing time
  • Humidity / salt mist / strong wind resistance
    12 times more salt-mist resistant, 40% more moisture exclusion, and dynamic mechanical loading 4 times higher than the IEC requirement. Suitable for rooftop, ground-mounted, and floating systems.
    Extended product warranty of 15 years as well as 25 years of 82.5% or more performance guarantee
  • Compatible with 1500V systems to reduce BOS cost
  • IP-68 potted junction box and MC4 connector
  • Passed test standards that are 3 times more stringent than the International Electrotechnical Commission(IEC) test requirements
  • VPC-certified by Bureau of Standard, Metrology and Inspection, Taiwan

 

 

Electrical Data (STC)
Nominal Power PN 380~390W
Max. System Voltage 1000V / 1500V
Typ. Temperature Coefficient of PN -0.42 %K
Certifications IEC/EN 61215, IEC/EN 61730,
IEC 61701 (salt mist corrosion test) , 
IEC 62716 (ammonia corrosion test),
VPC
Dimensions (L x W x H) 2024 x 1022 x 40 mm

 

Dimensions: mm(inch)

SunBravo PM072MW2 / PM072MW3

 

 

 * For further information, please refer to the relevant documents in Download Center.